- Manjalpur, Vadodara, Gujarat
- GST NO. : 24AIYPR7180G1ZK
- +91-9375939776, +91-8320187543
Flat Bar
Leading Wholesaler, Trader and Distributor of 7075 Aluminium Flat Bar, EN42J Spring Steel Flat Bar, EN8 Alloy Steel Flat Bar and Mild Steel Bright Flat Bar from Vadodara.
| Business Type | Supplier, Trader, Distributor |
| Thickness | 1-100mm |
| Type | Aluminium Flat Bar |
| Width | 100-150mm, 150-200mm, 200-250mm |
| Length | 3000-4000mm, 6 Meter |
| Brand Name | Hindalco |
| Country of Origin | India |
| Feature | Excellent Quality, Flawless Finish, High Quality |
| Application | Industry, Construction Use |
| Color | Grey |
| Shape | Rectangular |
| Material | Aluminium |
Preferred Buyer From
| Location | Anywhere in India |
-
High Strength:7075-T6 is a high-strength alloy, often referred to as "aircraft grade" due to its use in aerospace applications. It's stronger than many mild steels.
-
Strength-to-Weight Ratio:Its excellent strength-to-weight ratio makes it suitable for applications where minimizing weight is crucial.
-
Machinability:7075-T6 is considered to have good machinability, allowing for intricate designs and precision machining.
-
Corrosion Resistance:It exhibits good corrosion resistance, which is important for long-term durability in various environments.
-
T6 Temper:The "T6" indicates the alloy has undergone solution heat treatment followed by artificial aging, a process that significantly enhances its strength.
-
Not ideal for welding:While it has good machinability, 7075-T6 is not ideal for welding,Read More...
Business Type Supplier, Trader, Distributor Material Spring Steel Shape Flat Color Grey Application Construction Use Certification ISI Certified Country of Origin India Brand Name Bhagwati Steel Grade EN42J Thickness > 50 mm Capacity 5000kgs Preferred Buyer From
Location Anywhere in India Read More...Spring Steel EN42J Spring steel round bar is suitable for a wide variety of spring applications including flat springs, clutches, knives, doctor blades, saw blades, agricultural tools, wood cutting saws, shims, knives, blades, shims, washers, masonry tools. When heat treating EN42 temperatures, including the rate of heating, cooling and soaking times, etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium, and workpiece transfer facilities. Please consult your heat treatment provider for full guidance on the heat treatment of spring steels.
Spring Steel EN45 is a manganese spring steel. That is to say, it is a steel with a high carbon content, traces of manganese that affect the metal’s properties, and that it is generally used for springs (such as the suspension springs on old cars). It is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN45 offers excellent spring characteristics. EN45 is commonly used in the automotive industries for the manufacture and repair of leaf springs.
Spring Steel EN47 is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to stress, shock, and vibration.EN47 is used widely in the motor vehicle industry and in many general engineering applications. Suitable for applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, gears, spindles, and pumps.
Business Type Supplier, Trader, Distributor Country of Origin India Technics Hot Rolled Application Construction Use Shape Rectangular Material Alloy Steel Brand Name Bhagwati Color Black Single Piece 6 meter Steel Grade EN8 Hardness 210 HRC Preferred Buyer From
Location Anywhere in India Read More...EN8 Grade Introduction:EN8 Flat is an unalloyed medium carbon steel grade with reasonable tensile strength. It is normally supplied in cold-drawn or as-rolled conditions. Tensile properties can vary but are usually between 500-800 N/mm². EN8 is widely used for applications that require better properties than mild steel but does not justify the costs of alloy steel. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance. EN8 is available from stock in the bar and can be cut to your requirements. We also offer flame cut plates cut to your required sizes and normalized. EN8 plates can be supplied surface ground or precision ground. EN8 Grade Application:EN8 steel material is suitable for all general engineering applications requiring a higher strength than mild steel such as:- general-purpose axles
- shafts,
- gears,
- bolts and studs.
- spindles,
- automotive and general engineering components,
- other general engineering parts etc.
- BS 970-1991:080M40
- AISI/ASTM A29:1038, 1040, 1045
- DIN Werkstoff No.: 1.0511, 1.1186, 1.1189
- BS & DIN European: C40, CK40, C45, CK45
- JIS G4051: S40C, S45C
Business Type Supplier, Trader, Distributor Material Mild Steel Shape Rectangular Color Grey Application Construction Use Technics Hot Rolled Steel Grade EN8 Single Piece Length 6 meter Thickness 5mm Surface Finish Bright Preferred Buyer From
Location Anywhere in India Read More...MS – BRIGHT Flat Grade Introduction:The term Mild Steel applies to all Size Patti low carbon Steel that does not contain any alloying elements in its makeup and has a carbon content that does not exceed 0.25%. The term “Mild” is used to cover a wide range of specifications and forms for a variety of Steel. Mild Steel is used in mechanical engineering applications for parts that will not be subject to high stress. When in its bright cold drawn condition the steel is able to endure higher levels of stress, particularly on smaller diameters. but Compared to normal Mild Steel, bright Mild Steel provides tighter sectional tolerances, increased straightness, and a much cleaner surface. The main advantage of cold drawn steel is that Steel can be brought closer to the finished machine size, reducing machining costs. Another benefit of bright Steel bars is a marked increase in physical strength over hot rolled bars of the same section. Mild steel for industries of all sizes and our affordable products will prove to be a great asset for your enterprise. An alloy of carbon and iron is known as steel and the properties of steel are different according to its grade. For instance, the carbon content present in the steel bar can be anything, say 0.08 percent to 2 percent. Mild steel can be easily referred to as plain steel or carbon steel. so Usually it is quite durable and strong in its form. We ensure timely delivery of steel bars so that you can carry out your manufacturing without any hindrance. Mild steel comes in a wide range of grades and no matter which one you choose, you get the best quality. We manufacture all our steel grades whether alloy or mild, using “A grade” raw materials and we also do regular quality checks in order to ensure that each batch we deliver meets our standards. MS – BRIGHT Flats Grade Application:
- Oil and Gas Pipeline
- Chemical Industry
- Plumbing
- Heating
- Oil & Gas Industry
- Water Supply Systems
- Paper & Pulp Industry
- Power Plant
- Fabrication Industry
- General purpose applications
- Food Processing Industry
- Structural Pipe
- Heat Exchangers
Raise your Query
Hi! Simply click below and type your query.
Our experts will reply you very soon.